Palmgren 425 4.5-Inch Milling Machine Vise, Dark Grey

Palmgren 425 4.5-Inch Milling Machine Vise, Dark Grey Review

See more picture

Palmgren 425 4.5-Inch Milling Machine Vise, Dark Grey Feature

• Jaw width: 4-1/2-Inch
• Jaw opening: 4-Inch
• Throat depth: 1-1/4-Inch
• Vise height: 2-3/8-Inch
• Lead screw type: Acme

This vise is designed for applications where low overall height is necessary. Made from 30,000 PSI tensile strength, fine cast iron. Base and bed are parallel to 0.001-Inch. Center of base is open for holding work through body of vise.

Check price now

Rerate Products

Customer Review

Mar 31, 2012 16:44:36

Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed

Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed Review

See more picture

Jet 690019 JTM-1 230/460-Volt 3 Phase Vertical Milling Machine with X-Axis Powerfeed Feature

• X-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 16 spindle speeds ranging from 80-5440 RPM

The JTM-1 with X Powerfeed is the perfect solution for maintenance shops, repair shops, schools and light production. The 2 HP motor requires 230V, 3-phase. Durable Meehanite casting and a precision bored and honed milling head. Chromed, large-diameter quill and high-precision Class 7 spindle bearings. HP: 2, Volts: 230, Speed (RPM): 80 - 5,440, Speeds (qty.): 16, Vertical Stroke: 5, 360deg Head Swivel: Yes, Draw Bar: Yes, Swing: 19, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 17 1/2, Worktable L x W (in.): 9 x 42, Light Included: No, Stand Included: Yes, Dimensions L x W x H (in.): 64 x 87 x 52

Check price now

Rerate Products

Customer Review

Mar 30, 2012 15:18:05

Milling Machine - 18"W x 12"H - Peel and Stick Wall Decal by Wallmonkeys

Milling Machine - 18"W x 12"H - Peel and Stick Wall Decal by Wallmonkeys Review

See more picture

Milling Machine - 18"W x 12"H - Peel and Stick Wall Decal by Wallmonkeys Feature

• ALL orders CUSTOM printed. When you place an order, the image is made in the USA, just for you!
• Printed on WHITE, premium, self-adhesive, re-positionable fabric paper.
• No nails, frames or glue. No professional installation required.
• Simply peel and stick! Easy to remove and re-apply.
• BE SURE you ordered the right size for your intended use!!

WallMonkeys wall graphics are printed on the highest quality re-positionable, self-adhesive fabric paper. Each order is printed in-house and on-demand. WallMonkeys uses premium materials & state-of-the-art production technologies. Our white fabric material is superior to vinyl decals. You can literally see and feel the difference. Our wall graphics apply in minutes and won't damage your paint or leave any mess. PLEASE double check the size of the image you are ordering prior to clicking the 'ADD TO CART' button. Our graphics are offered in a variety of sizes and prices.

WallMonkeys are intended for indoor use only.

Printed on-demand in the United States Your order will ship within 3 business days, often sooner. Some orders require the full 3 days to allow dark colors and inks to fully dry prior to shipping. Quality is worth waiting an extra day for!

Removable and will not leave a mark on your walls.

Our catalog of over 10 million images is perfect for virtually any use: school projects, trade shows, teachers classrooms, colleges, nurseries, college dorms, event planners, and corporations of all size.

Check price now

Rerate Products

Customer Review

Mar 29, 2012 11:20:04

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table Review

See more picture

JET JTM-1054R 5-Horsepower 230-460-Volt Three Phase R8 Taper Vertical Mill with 10-Inch by 54-Inch Table Feature

• Meehanite casting
• Hardened and ground table certified to be 52C Rockwell hardness
• Chrome leadscrews on X and Y axis
• Box style ways on Y and Z axis
• Hardened and ground table

Includes 10-in x 54-in Vertical Milling Machine - 690053

Check price now

Rerate Products

Customer Review

Mar 28, 2012 04:44:08

Vertical DRILLING End MILLING Machine Drill Press Mill ±45 Angle 3/4HP 2500 RPM **$8.88 FLAT SHIPPING RATE w/in 48 states**

Vertical DRILLING End MILLING Machine Drill Press Mill ±45 Angle 3/4HP 2500 RPM **.88 FLAT SHIPPING RATE w/in 48 states** Review

See more picture

Vertical DRILLING End MILLING Machine Drill Press Mill ±45 Angle 3/4HP 2500 RPM **.88 FLAT SHIPPING RATE w/in 48 states** Feature

• We CANNOT ship to HI, AK, PR, Canada, nor PO BOX. Please contact us first.
• Max. Spindle Travel: 7" (180mm); Drilling Capacity: 5/8" (13mm); Motor Output Power: 3/4 HP
• Spindle Rotary Angle: ±45?; Spindle Speed: L:0~1100RPM, H:0~2500RPM
• End Milling Capacity: 1/2" (16mm); Face Milling Capacity: 1-3/16" (30mm)
• Bed Width: 800mm - 31-1/2"; Noise Level: 70~75dB(A); Power: 110V ~ 50/60Hz

Other features include: Max. Table Travel: 10"/12" (250/300mm) ; Max. Cross Slide: 4"/5" (100/130mm) Quantity:1~~ Over All Dimension: 25"W x 18"D x 24"

Check price now

Rerate Products

Customer Review

Mar 25, 2012 06:47:11

Annular Cutter & Magnetic Drill Accessories - Unibor <font size=1>(Coolant / Arbors / Drill Chucks) </font size=1> Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank

Annular Cutter & Magnetic Drill Accessories - Unibor (Coolant / Arbors / Drill Chucks) Model No.: UP 001, 3/4" Milling Machine Adapter 3/4" Weldon Shank Review

See more picture

UNIBOR Portable Magnetic Drills

Check price now

Rerate Products

Customer Review

Mar 24, 2012 01:20:05

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty Review

See more picture

Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty Feature

• Bolton Tools At-320 12" X 30" Combination Lathe Milling Machine, 12 Speeds with a Flip of a Lever,1 1/2" Spindle Bore, Mill Head R8, Seperate Lathe 1 1/2 Hp and Mill 3/4 Hp Motors, 110v or 220v Ships with Standard Accessories and 1 Year Warrantty

Geared Combo Lathe/Mill Drill 12" x 30" ,1 1/2" hp lathe motor & 3/4 hp mill motor ,110v or 220v,1 1/2" " spindle bore, 12 lathe speeds ,4 mill speeds, 5-48 TPI, 6 1/4" cross slide travel , low tolerance! R8 Mill

Check price now

Rerate Products

Customer Review

Mar 22, 2012 12:09:10

12" X 30" CNC Milling Machine,teach and Playback and Conversational Graphics Programming, Full G-code Capability,vector Control Spindle Drive, Simultaneous Multiple M-codes (Up to 3), 2 Hp Motor,cooling System,light and Warrantty Included

12" X 30" CNC Milling Machine,teach and Playback and Conversational Graphics Programming, Full G-code Capability,vector Control Spindle Drive, Simultaneous Multiple M-codes (Up to 3), 2 Hp Motor,cooling System,light and Warrantty Included Review

See more picture

12" X 30" CNC Milling Machine,teach and Playback and Conversational Graphics Programming, Full G-code Capability,vector Control Spindle Drive, Simultaneous Multiple M-codes (Up to 3), 2 Hp Motor,cooling System,light and Warrantty Included Feature

• Serial Port for use with existing programming
• Large 2 Horespower 3 phase 220, 40 amps
• G-code or M code programming
• spindle speeds from 100-1600 RPM
• MT#3 tailstock Taper , Spindle bore - 1-1/2"

Conversational controls can be thought of as a single-purpose CAM system, making it quick and easy to generate a program right at the machine. With print in hand, the setup person can step up to the machine and quickly create the CNC program. Conversational controls allow programs to be entered without any need for math, and take much of the tediousness out of programming. With one popular turning center conversational control, for example, average programming time is under ten minutes. Or use Serial Port with existing programing. Automatic tool post, Fully contained unit set up and ready to turn out quality parts, 1 year warrantty, programming support ,no annual software upgrades ever. Excellent Value

Check price now

Rerate Products

Customer Review

Mar 21, 2012 01:00:04

Milling Machine Visorguard Kit

Milling Machine Visorguard Kit Review

See more picture

Milling Machine Visorguard Kit . Provides Complete Protection Between Cutting Tools And The Operator's Eyes. Easy Grab Handle Flexbar Arm Permits Setting Of Visorguard At The Correct Height And Angle For Each Setup. Mounts On Most Machines, Even With Digital Readouts, In Minutes. All Mounting Brackets Included. Shield Size 16" Wide X 8" High.

Check price now

Rerate Products

Customer Review

Mar 19, 2012 22:01:03

Kaba Ilco #P-X23MC Key Machine Replacement Cutter

Kaba Ilco #P-X23MC Key Machine Replacement Cutter Review

See more picture

Kaba Ilco #P-X23MC Key Machine Replacement Cutter Feature

• Kaba Ilco #P-X23MC Key Machine Replacement Cutter
• KABA ILCO CORP

Replacement Key For 025 Key Machine Replacement Cutter.

Check price now

Rerate Products

• Nyl Key Mach Brush

Customer Review

Mar 17, 2012 11:07:24