Jet 690158 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with Acu-Rite 200M 3-Axis (Knee) Digital Read Out and Powerfeed (X-Axis)

Jet 690158 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with Acu-Rite 200M 3-Axis (Knee) Digital Read Out and Powerfeed (X-Axis) Review

See more picture

Jet 690158 JTM-1050 230/460-Volt 3 Phase Variable Speed Vertical Milling Machine with Acu-Rite 200M 3-Axis (Knee) Digital Read Out and Powerfeed (X-Axis) Feature

• Acu-Rite 200M 3-axis(Knee) DRO and X-axis powerfeed installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• Variable spindle speeds with a range of 70-3800 RPM

Includes JTM-1050 Mill with 3-axis ACU-RITE 200S DRO and X Powerfeed Installed - 690158, Internal Coolant Tank Built (Coolant Pump Not Included), Tolerance Test Sheet, One Shot Lubrication System, Way Covers, Draw Bar, Tool Box

Check price now

Rerate Products

Customer Review

Nov 30, 2011 22:30:08

Vise, 3" Precision Milling, Heavy

Vise, 3" Precision Milling, Heavy Review

See more picture

Vise, 3" Precision Milling, Heavy Feature

• Precision 3" Kurt-style milling machine vise
• Detachable swivel base features easy to read divisions
• Hardened replaceable jaws
• The top, bottom of vise bed, gib, jaws, swivel base, and all plate mounting surfaces are ground

The hardened and ground jaws on this vise are 3.15" wide, 1.04" deep. and open 3". The vise is 10.85" long. Without the base, the vise is 3.05" high. With the base, the vise is 4.21" high. Without the swivel base, the ways of the vise are parallel to the base of the vise within 0.0006" in 4". The jaws are perpendicular to the ways within 0.002" in 4". With the swivel base installed, the ways of the vise are parallel to the base of the vise within 0.0008" in 4". The replaceable jaws can be mounted on either end of the fixed and movable jaw supports providing a wide range of clamping distances.

Check price now

Rerate Products

Customer Review

Nov 29, 2011 20:54:37

Grizzly G1005Z Mill/Drill Milling Machine #25

Grizzly G1005Z Mill/Drill Milling Machine #25 Review

See more picture

The Model G1005Z Mill/Drill comes complete with 1/2" drill chuck, small angle drilling vise, & carbide-tipped fly cutter. Features ? Head swivels 360° ? Front-mounted ON-OFF switch with thermal overload protection ? Heavy-duty 1 HP motor ? Excellent speed range ? Extremely quiet machine ? Easy clutch-type mechanism for engaging fine down-feed ? Positive quill lock ? Adjustable gibs on table ? Adjustable stops on table ? Spindle supported by heavy-duty, tapered roller bearings ? Graduations in inches Specifications ? Spindle taper: R-8 ? Spindle travel: 3-5/8" ? Swing: 16" ? Max. distance spindle to table: 14-3/8" ? Column size: 3-3/4" ? Collars calibrated: .001" ? T-Slots: 4 @ 1-1/2" centers, 3/8" Studs ? Table size: 7-1/2" x 23" ? Longitudinal table travel: 15" ? Cross-slide travel: 5-1/2" ? Drilling capacity: 1" ? Number of speeds: 12 ? Range of speeds: 110-2580 RPM ? Motor size: 1 HP ? Approximate shipping weight: 435 lbs.

Check price now

Rerate Products

Customer Review

Nov 28, 2011 00:53:09

2" x 2" x 2" Square Angle Plate

2" x 2" x 2" Square Angle Plate Review

See more picture

2" x 2" x 2" Square Angle Plate Feature

• Size: 2" x 2" x 2"

Solid faces (no slots). Precision Machined Semi-steel. Accuracy: .002" in 6". 2" thru 8" have 1 rib. 10" thru 12" have 2 ribs.

Check price now

Rerate Products

• Pair of 1" x 2" x 3" Blocks
• 1" x 1" x 1" Square Angle Plate
• 3" x 3" x 3" Square Angle Plate
• 4" x 4" x 4" Square Angle Plate
• Wixey WR300 Digital Angle Gauge

Customer Review

Nov 26, 2011 03:56:11

4" K Type Milling Machine Vise

4" K Type Milling Machine Vise Review

See more picture

4" K Type Milling Machine Vise Feature

• Jaw Width: 4"
• Jaw Height: 1 3/8"
• Total Height: 4 1/4"
• Opening w/ Jaws: 2 1/4"
• Opening w/o Jaws: 3"

With swivel base, graduated in 180 Degree. Replacement jaws. Large Acme screw. Good Quality Medium Duty Vise

Check price now

Rerate Products

Customer Review

Nov 20, 2011 05:47:05

4" Cross Slide Drill Press Vise Metal Milling Machine

4" Cross Slide Drill Press Vise Metal Milling Machine Review

See more picture

4" Cross Slide Drill Press Vise Metal Milling Machine Feature

• Provides solid, stable platform for exact centering and accurate drilling
• Cross-slide design provides two-axis precision adjustments for perfect bit placemen
• Heavy-duty cast steel construction with machined cold-rolled steel screws, chrome handle
• Easy secure attachment to any drill press table with multiple mounting lugs
• Vise handles drop down out of the way for safety, freedom-of-movement.

A fully adjustable heavy duty 4" Cross Slide Vise. Turn your drill press into a milling machine. Our cross slide drill press vise features: Heavy duty construction, Jaw width: 4", Maximum jaw opening: 3 1/2", Vise travel: 5 1/2", Vise and cross slide have adjustable shims for fine adjustment, Base size: 9" x 5", Overall unit size 11" x 11" x 6 1/4", Precision threaded clamping and cross slide screws, Cross slides have removable adjusting crank handles

Check price now

Rerate Products

• 1/4" 4Fl SE Carbide End Mill
• 1/8" 4Fl SE Carbide End Mill
• 6 Inch LCD Digital Caliper with Extra Battery and Case
• Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
• Neiko Stainless Steel 6-Inch Digital Caliper with Extra-Large LCD Screen - Instant SAE-Metric Conversion

Customer Review

Nov 19, 2011 01:27:27

Jet 690006 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine with X-Axis Powerfeed

Jet 690006 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine with X-Axis Powerfeed Review

See more picture

Jet 690006 JTM-2 115/230-Volt 1 Phase Vertical Milling Machine with X-Axis Powerfeed Feature

• X-axis powerfeed installed
• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 8 spindle speeds ranging from 80-2720 RPM

The JTM-2 with X Powerfeed is the perfect solution for maintenance shops, repair shops, schools and light production. The 2 HP motor requires 115/230V, single-phase (pre-wired 115V). Durable Meehanite casting and a precision bored and honed milling head. Chromed, large-diameter quill and high-precision Class 7 spindle bearings. HP: 2, Volts: 115/230 (prewired 115V), Speed (RPM): 80 - 2,720, Speeds (qty.): 8, Vertical Stroke: 5, 360deg Head Swivel: Yes, Draw Bar: Yes, Swing: 19, Chuck Size (in.): 5/8, Max. Spindle Distance (in.): 17 1/2, Worktable L x W (in.): 9 x 42, Light Included: No, Stand Included: Yes, Dimensions L x W x H (in.): 64 x 57 x 82

Check price now

Rerate Products

Customer Review

Nov 16, 2011 04:49:11

Zen Toolworks CNC Carving Machine DIY Kit 7x7

Zen Toolworks CNC Carving Machine DIY Kit 7x7 Review

See more picture

Zen Toolworks CNC Carving Machine DIY Kit 7x7 Feature

• 7(X) x 7(Y) x 2(Z) inches travel capacity
• PVC Frame, Steel guide rods and precision linear bearings provide maximum accuracy and rigidity
• New Nema 17 Stepper Motor included, 2 Phase, 4 Wires, 1.3A
• M8 x 1.25 Stainless Steel Lead Screws with ball bearng end support
• Effective backlash elimination with brass Anti-Backlash Lead Screw nuts

NOT INCLUDED - This is just the CNC machine with motors. You will need a 3 Axis Stepper Motor Driver to manage each motor, a spindle/cutter (a Dremel would work) and a DC power supply for the driver. You will also need a computer with a standard printer port and CNC software. - You will also need a way to mount and secure the spindle/cutter tightly to the Z-axis plate on the machine. We offer a Spindle Kit complete with a mounting frame for this machine. We also offer a 3 Axis Stepper Motor Driver that we use with our CNC systems.

You can see some video demos of this machine in action. Just go to YouTube and search for "Zen Toolworks CNC"

You are looking at a DIY kit of a CNC carving machine. Now you can build your very own CNC carving machine to do relief carving, letter cutting, inlay and all other interesting features to enhance your woodworking, PCB or other projects.

The body of the machine is constructed with high density PVC boards. Steel guid rod, linear bearing and stainless steel lead screws are used to construct the moving parts. The anti-backlash brass nut design will virtually eliminate all backlashes. New Nema 17 motors(2 phases, 1.3A, 4 leads) for all three axis are also included. The install is very easy, if you have a bench vise and a power screw driver, that will really help. Install instruction CD is included in the package. Assembling the CNC is very fun and only takes around 3-4 hours to complete. You will be amazed by what can be achieved by this machine. Finally, you can build and own your very own CNC machine for a price that's within your budget!

When you purchase, you will be invited to join our member-only discussion forum. This is a good place to get support and learn from other CNC users and share your own knowledge.

Check price now

Rerate Products

• V Shaped Carving Bit
• TB6560 3 Axis CNC/ Laser Machine Stepping Motor Controller. Support Mach3 & KCam
• Inductive Dc 6-36v Proximity Sensor Approach Switch
• Cables To Go 16899 USB To DB25 IEEE-1284 Parallel Printer Adapter Cable, 6 Feet
• Build Your Own CNC Machine (Technology in Action)

Customer Review

Nov 10, 2011 01:33:07